Maserati Khamsin Coupe by Bertone

Car producer : 



Khamsin Coupe by Bertone





The Khamsin was introduced on the Bertone stand at the November 1972 Turin Auto Show. Designed by Marcello Gandini, it was Bertone's first work for Maserati. In March 1973 the production model was shown at the Paris Motor Show. Regular production of the vehicle started only a year later, in 1974. The Khamsin was developed under the Citroën ownership for the clientele that demanded a front-engined grand tourer on the lines of the previous Ghibli, more conventional than the mid-engined Bora.

In 1977 a mild facelift added three horizontal slots on the Khamsin's nose to aid cooling. Inside it brought a restyled dashboard and a new padded steering wheel. One Khamsin was delivered to Luciano Benetton in 1981. Despite the many improvements over its predecessor, the Khamsin didn't replicate its success; partly due to the concurrent fuel crisis that shrunk demand for big V8 grand tourers. Production ended in 1982, with 435 vehicles made (a mere third of the Ghibli's 1274 examples production run) - 155 of whose had been exported to the United States.

The Khamsin's body is prominently wedge-shaped, with a fastback roofline and kammback rear end. The tail is characterized by a full-width glass rear panel, carrying inset "floating" tail lights.

Combined with the wide, almost all-glass rear hatch this gave exceptional rear visibility in comparison to most cars, especially similar sports cars. Cosmetic triangular vented panels are inlaid in the C-pillar, with the right-hand one hiding the fuel filler cap. Another distinguishing feature is the engine bonnet, pierced by asymmetrical vents. Design features as the wedge body, glazed tail panel and the location of the fuel filler cap all carry Gandini's signature, as they were all present on his earlier Lamborghini Espada. Despite being marketed as a 2+2, the leather-trimmed rear seats, nestled between the two fuel tanks, were found too lacking in headroom and legroom to be usable. The complete instrumentation included gauges for speedometer, tachometer, water temperature, oil temperature, oil pressure, voltmeter and a clock.

The Khamsin used an all-steel monocoque construction, with a rear Silentbloc-bushing insulated tubular subframe supporting the rear suspension and differential. Suspension was double wishbones all around - a major improvement over the Ghibli's leaf-sprung solid axle - with coaxial springs and shock absorbers (single upfront, double at the rear) and anti-roll bars.

The front-mid mounted engine gave the car a 50/50 weight distribution; it was pushed so far back towards the firewall that the full size spare tire could be stored beneath the radiator in front of it, thus freeing up space in the boot. Apart from the adoption of Bosch electronic ignition, Maserati's 4.9 L (4,930 cc) DOHC, 16-valve V8 engine was carried over from the Ghibli SS and delivered 240 kW (330 PS; 320 bhp) at 5500 rpm and 482.0 N·m (355.5 lb·ft) of torque at 4000 rpm. It was fed through four double barrel 42 DCNF 41 Weber carburettors and used dry-sump lubrication. As on the Ghibli the fuel tanks were two, one left and one right, with a single fuel filler on the right hand side. The double exhaust system ended with two resonators, each with twin exhaust tips. Power was routed to the rear wheels through a 5-speed, all syncromesh ZF manual gearbox with a single-plate dry clutch; a 3-speed Borg Warner automatic transmission was also available on request. Khamsins rode on 215/70 Michelin XWX tyres on 7½J 15" Campagnolo alloy wheels.

Khamsin models destined for the United States were subject to significant design alterations to comply with newly enacted legislation with respect to bumper height/strength and placement of tail lights. Maserati and Bertone designer Marcello Gandini strongly objected to the NHTSA's decision prohibiting tail light assembly fitment in the rear vertical glass panel. After a lengthy and unfruitful appeal process, Maserati ultimately capitulated to obtain federalization of the Khamsin and introduce it to their most vital export market.

The federalized Khamsin went on sale in 1975. These models required fitting a solid version of the glass tail panel. The tail lights had to be moved downward, to the rear bumpers' former location; the new, protruding bumper was mounted below the tail lights. This new configuration of components left the exhaust tips unable to clear the bumper, a problem resolved flipping the exhaust resonators upside down. The front bumper was also replaced by a bigger one. Square side markers found their way on the front and rear wings. The engine had to be revised too, gaining smog control equipment (air injection, thermal reactors in the exhaust manifolds, different carburettors and leaner fuel mixture) and losing 5 hp.

Sold for: 178250 EUR
Go to restoration
See other models

You may also like these cars

to top