Chevrolet Corvette C2 396/425 L78 Coupe
|
Car producer : |
Chevrolet |
|---|---|
|
Model: |
Corvette C2 396/425 L78 Coupe |
|
Year: |
1965 |
|
Type: |
Coupe |
For its third season, the 1965 Corvette Stingray further cleaned up style-wise and was muscled up with the addition of an all-new braking system and larger powerplants. 1965 styling alterations were subtle, confined to a smoothed-out hood now devoid of scoop indentations, a trio of working vertical exhaust vents in the front fenders that replaced the previous nonfunctional horizontal "speedlines," restyled wheel covers and rocker-panel moldings, and minor interior trim revisions. The 1965 Corvette Stingray became ferocious with the mid-year debut of a big-block V-8, the 425 hp (317 kW) 396 in³ (6.5 L) ("big block") V8. Ultimately, this spelled the end for the Rochester fuel injection system, as the carbureted 396/425 hp option cost $292.70 to the fuel injected 327/375 hp's $538.00. Few buyers could justify $245 more for 50 hp (37 kW) less, even if the FI cars offered optional bigger brakes not available on carburated models. After only 771 fuel injected cars were built in 1965, Chevrolet discontinued the option. It would be 18 years until it returned.
Four-wheel disc brakes were also introduced in 1965. The brakes had a four-piston design with two-piece calipers and cooling fins for the rotors. Pads were in constant contact with the rotors, but the resulting drag was negligible and didn't affect fuel economy. Further, the light touching kept the rotors clean and didn't diminish pad life, which was, in fact, quite high: a projected 57,000 miles for the front brakes and about twice that distance for the rear binders. Total swept area for the new system was 461 square inches, a notable advance on the 328 square inches of the previous all-drum system. Per pending federal regulation, there was also a dual master cylinder with separate fluid reservoirs for the front and rear lines. Road testers rightly applauded the all-disc brakes. A side exhaust system appeared as an option as did a telescopic steering wheel. Also available were alloy spinner rims, at US$322 a set.
