Plymouth Barracuda 3. Generation BH 383/330 1971 Convertible

Car producer : 

Plymouth

Model:

Barracuda 3. Generation BH 383/330 1971 Convertible

Year:

1970-1974

Type:

Cabriolet



The 1970 to 1974 E-body Barracuda, no longer Valiant-based, was available as a coupe and a convertible, both of which were very different from the previous models. The final model year for the Barracuda was 1974.

The redesign for the 1970 Barracuda removed all its previous commonality with the Valiant. The original fastback design was deleted from the line and the Barracuda now consisted of coupe and convertible models. The all-new model, styled by John E. Herlitz, was built on a shorter, wider version of Chrysler's existing B platform, called the E-body. Sharing this platform was the newly launched Dodge Challenger; however no sheet metal interchanged between the two cars, and the Challenger, at 110 inches (2,800 mm), had a wheelbase that was 2 inches (51 mm) longer than the Barracuda.

Three versions were offered for 1970 and 1971: the base Barracuda (BH), the luxury oriented Gran Coupe (BP), and the sport model 'Cuda (BS). For one year (1971), there also was the Barracuda Coupe, a low-end model which (like other Coupe series Chrysler Corp. offered that year) had a fixed rear passenger window and minor B pillar instead of roll-down rear passenger windows. The high-performance models were marketed as 'Cuda deriving from the 1969 option. The E-body's engine bay was larger than that of the previous A-body, facilitating the release of Chrysler's 426 cu in (7.0 L) Hemi for the regular retail market.

For 1970 and 1971, the Barracuda and Barracuda Gran Coupe had two six-cylinder engines available — a new 198 cu in (3.2 L) version of the slant-6, and the 225 — as well as three different V8s: the 318ci, the 383ci with two-barrel carburetor and single exhaust, and the 383ci with four-barrel carburetor and dual exhaust 330 hp (250 kW) SAE gross. The Cuda had the 383ci 335 hp (250 kW) SAE gross (same as Dodge's 383 Magnum) as the standard engine. It also had the 440ci four-barrel Super Commando, the 440ci six-barrel Super Commando Six Pak, and the 426ci Hemi. The 440- and Hemi-equipped cars received upgraded suspension components and structural reinforcements to help transfer the power to the road.

In 1970 the big-block power options offered to the customer were:

1.approximately 335 hp (250 kW) SAE net in the high performance 383-4V,

2.approximately 375 hp (280 kW) SAE net in the 440-4V,

3.approximately 390 hp (290 kW) SAE net in the 440-6V, and

4.approximately 425 hp (317 kW) SAE net in the 426-8V.

Other Barracuda options included decal sets, hood modifications, and some unusual "high impact" colors such as "Lime Light", "Bahama Yellow", "Tor Red", "Lemon Twist", "Curious Yellow", "Vitamin C", "In-Violet", "Sassy Grass" and "Moulin Rouge".

Swede Savage and Dan Gurney raced identical factory-sponsored AAR (All American Racers) 'Cudas in the 1970 Trans-Am Series. The cars qualified for three pole positions but did not win any Trans-Am races; the highest finish was second at Road America.

A street version of the AAR 'Cuda was produced, powered by the 340 cu in (5.6 L) "Six Pack" (three two-barrel carburetors) engine. Four 1970 Hemi 'Cudas were also successfully raced by Chrysler France, from 1970 until 1973. The works team director Henrí Chemin piloted the first car, and then sold it on to friend and privateer J. F. Mas who went on to race it for another two years. This Hemi 'Cuda won four French Group 1 class championships, three on track and one in hill-climbing.

The Barracuda was changed slightly for 1971, with a new grille and taillights, seat, and trim differences. This would be the only year that the Barracuda would have four headlights, and also the only year of the fender "gills" on the 'Cuda model’.

The 1971 Barracuda engine options would remain the same as that of the 1970 model, except the four-barrel carbureted 440 V8 engine was not available; all 440-powered Barracudas had a six-barrel carburetor setup instead.

In 1970 and 1971 only, the shaker hood (option code N96), elastomeric (rubber) colored bumpers, and the Spicer-built Dana 60 rear axle were available. The shaker hood was available with 340, 383, 440 four-barrel, 440 six-barrel, and 426 Hemi engines. The elastomeric (rubber) colored bumpers were available as a front-only option, code A21, or as a front and rear combination, option code A22. The heavy-duty (and heavy) Dana 60, with a 9.75 in (248 mm) ring gear, was standard equipment with manual transmissions and 440 six-barrel and 426 Hemi engines, and was optional on those with the automatic transmission.

With a new grille and single headlights (very similar to the 1970 model) and four circular taillights for 1972, the Barracuda would remain basically unchanged through 1974, with new body side stripes, and minor changes to the bumpers to conform with federal impact standards being the only significant variations. Big block engines (383, 440, & 426 Hemi), heavy duty suspensions and rear axles, and wide tires mounted on 15" x 7" wheels were no longer offered. Additionally; convenience and comfort items such as power seats, power windows, and interior upgrade (leather seats and plush carpeting) options were dropped, though a sun roof could still be ordered. For 1972 only, three engine choices were offered: a 225 six, the 318 (base engine for both 'Cuda and Barracuda), and a 340, detuned to meet emission standards. For 1973 the 225 six was dropped, with the 318 and 340 V-8s being the only engine choices. For 1974 a slightly more powerful 360 V-8 replaced the 340, and the only real performance options retained were the four-speed manual transmission (equipped with a Hurst shifter) mated to a performance ratio (3.55 to 1) rear axle for the 340 and 360 engine, giving the car a respectable (for the time) zero-to-sixty time of 8.2 seconds.

There was also an increase in weight as bumpers became larger and, starting in 1970, all E body doors were equipped with heavy steel side-impact protection beams. Higher fuel prices and performance-car insurance surcharges deterred many buyers as the interest in high performance cars waned. Sales had dropped dramatically after 1970, and while 1973 showed a sales uptick, Barracuda production ended 1 April 1974, ten years to the day after it had begun.

The 383 Magnum was the standard engine for the 1970 Dodge Challenger R/T, 1970 Dodge Coronet Super Bee, 1970 Plymouth Cuda, and 1970 Plymouth Road Runner; it was not available in any other models. However, before 1972, American automobile manufacturers were allowing customers to special order nearly any engine they wanted. Thus, you could get a 1970 Plymouth Sport Fury S/23 with the 383 Magnum, which likely had 270 bhp (201 kW) SAE net. In 1971 the 440 Magnum was only available in the Plymouth Sport Fury GT, Satellite GTX and Dodge Charger R/T, where it was the standard engine for those models.

Sold for: 123750 USD
Go to restoration
See other models

You may also like these cars

to top