Ferrari 308 GTB Dino Vetroresina by Scaglietti
Car producer :  |
Ferrari |
---|---|
Model: |
308 GTB Dino Vetroresina by Scaglietti |
Year: |
1975-1977 |
Type: |
Coupe |
The Pininfarina-styled Ferrari 308 GTB was introduced at the Paris Motor Show in 1975 as a supplement to the Bertone-shaped 2+2 Dino 308 GT4 and a direct replacement for the 2-seater Dino 246.
Its F106 AB V8 engine was equipped with four twin-choke Weber 40DCNF carburettors and single coil ignition. European versions produced 255 PS (188 kW; 252 bhp) at 6600 rpm (7700 rpm redline), but American versions were down to 240 PS (177 kW; 237 bhp) at 6,600 rpm due to emissions control devices. European specification cars used dry sump lubrication. Cars destined to the Australian, Japanese and US market were fitted with a conventional wet sump engine from the GT4
A notable aspect of the early 308 GTB was that, although still built by Carrozzeria Scaglietti, its bodywork was entirely made of glass-reinforced plastic (or GRP), allowing a very light weight of 1,050 kg (2,315 lb). This lasted until June 1977, when the 308 was switched to steel bodies, resulting in an, alleged, 150 kg (331 lb) additional weight. However, a steel-bodied GTB only weighs 12 kg (26 lb) more than its fibreglass body counterpart. Standard wheels were 5-spoke 14-inch alloy. 16-inch wheels were made available later as an option, together with sports exhaust system, high compression pistons and high lift camshaft.
At the 1977 Frankfurt Motor Show the targa topped 308 GTS was introduced. Independently from the market, all GTS used a wet sump engine and were steel-bodied. European GTB models retained the dry sump lubrication until 1981.
There were 3219 GTS and 2897 GTB examples were made during the 1975–1980 production periods. Only 808 of the first fibreglass (vetroresina in Italian) version were made.
Test performance, 308 GTB (GRP): Weight (curb with 74 l fuel) 2,778 lb (1,260 kg), acceleration 0-100 mph 15.0s, 0–100 km/h 6.5 s, 100–200 km/h 17.8s, top speed 159 mph (256 km/h).