BMW 501 A

Car producer : 

BMW

Model:

501 A

Year:

1952-1958

Type:

Sedan



BMW was established as a business entity following a restructuring of the Rapp Motorenwerke aircraft manufacturing firm in 1917. After the end of World War I in 1918, BMW was forced to cease aircraft-engine production by the terms of the Versailles Armistice Treaty. The company consequently shifted to motorcycle production in 1923, once the restrictions of the treaty started to be lifted, followed by automobiles in 1928–29.

The first car which BMW successfully produced and the car which launched BMW on the road to automobile production was the Dixi, it was based on the Austin 7 and licensed from the Austin Motor Company in Birmingham, England.

Production at BMW's motor car factory in Eisenach restarted in late 1945 with pre-war BMW models. However, Eisenach was in the Soviet occupation zone, and the cars were not being manufactured by BMW AG, but by the Soviet manufacturing entity Autovelo. Despite not being made by BMW, these cars bore the BMW logo and were being sold as BMWs.

Meanwhile, BMW AG restarted manufacture on a much smaller scale, starting with pots and pans, and eventually moving up to household hardware and bicycles. Eventually, with permission from the U.S. authorities and funding from the banks under which BMW had been put into receivership, they began manufacturing motorcycles in 1948.

To end Autovelo's continued trademark infringement, the Eisenach branch of BMW was dissolved effective 28 September 1949 and was legally severed as at 11 October. Without any legal arguments to continue using BMW's name and logo, Autovelo changed the name to EMW (Eisenacher Motoren Werke) and changed the blue colour in the logo to red.

The BMW 501 was a luxury saloon car manufactured by BMW from 1952 to 1958. Introduced at the first Frankfurt Motor Show in 1951, the 501 was the first motor car to be manufactured and sold by BMW after the Second World War. The 501 and its derivatives, including the V8 powered BMW 502, were nicknamed “Baroque Angels” by the German public. The BMW 502 was the first postwar German car to be manufactured with a V8 engine.

While the 501 and 502 model numbers were discontinued in 1958, variations of the model, with the same platform and body, were continued until 1963.

The 501 was an all-new platform, with a perimeter frame, double A-arm front suspension with torsion bar springs, and a live axle with torsion bar springs at the rear. The steering mechanism was similar to a rack and pinion system except that the rack was semi-circular instead of straight.

The 501 was powered by the M337 engine, a development of the BMW M78 used in the pre-war BMW 326.

The four-speed gearbox was not bolted to the engine, but was a separate shaft-driven unit mounted between the second and third crossmembers. While the remote gearbox placement led to a complicated linkage to the column-mounted shifter, resulting in vague shifter action, it also improved legroom for the front passengers.

A look inside a "Baroque Angel"

The body was designed in house by Peter Schimanowski. After seeing the prototype, BMW's management commissioned Pininfarina to build an alternative. The Pininfarina prototype was thought to be too similar to his design for the Alfa Romeo 1900 saloon, so BMW stayed with Schimanowski's design. The steel body was far heavier than Schimanowski had calculated it to be, resulting in the completed car having a dry weight of 1,430 kilograms (3,150 lb). Performance suffered as a result, with a top speed of 135 km/h (84 mph) and acceleration to 100 km/h (62 mph) taking 27 seconds, both of which compared unfavourably with the six-cylinder Mercedes-Benz 220.

One innovation was the attention paid to passive safety. The car featured a robust chassis providing above average side impact protection, an unusually short steering column with the steering gear set well back from the front of the car, and a fuel tank placed in a carefully protected location above the rear axle in order to minimize fire risk in the event of an accident.

The 501 was introduced to the public in April 1951 at the Frankfurt Motor Show, as was its less expensive, production-ready rival, the Mercedes-Benz 220. The 501 made an impression on the public with its solid engineering and its extravagance. Its list price of more than fifteen thousand Deutsche Mark was about four times the average salary in Germany at the time. The public nicknamed the 501 "Barockengel" (Baroque Angel) in reference to the curved, flowing style of the body.

Development issues delayed the start of production until late 1952, and even then BMW still did not have equipment for pressing body panels in operation. The first 2,045 four-door saloon bodies were built by Karosserie Baur and were shipped from Baur in Stuttgart to BMW's factory in Munich for assembly. The thousandth 501 was completed on 1 September 1953.

The 501 and derivatives built at BMW were four-door saloons. Coupe and convertible versions were available as custom orders from Baur or Autenrieth.

The 501A was released in 1954 as a replacement for the original 501 with similar trim and equipment, but which sold for DM14,180, a price reduction of more than eight hundred Deutsche Mark from the original 501. The 501B was a decontented version that sold for DM500 less than the 501A. Both the 501A and 501B used a revised M337 engine.

Before the construction of the first prototype of the 501, Böning had calculated the mass of the car as designed, and realized that the six-cylinder engine would be barely adequate to power the car. He proposed the development of a larger engine to power future versions of the car to the management, who accepted his proposal. Böning began the design and development of a V8 engine similar in general design to the then-new Oldsmobile Rocket V8, with a single camshaft in the vee operating overhead valves in wedge-shaped combustion chambers through pushrods. The BMW OHV V8 engine differed from its Detroit contemporaries in the use of an aluminium alloy block with cast-iron cylinder liners, and in its smaller size, initially with a 74 millimetres (2.9 in) bore and a 75 millimetres (3.0 in) stroke, giving a displacement of 2,580 cc (157 cu in). The development of the V8 was completed by Fritz Fiedler, who replaced Böning as BMW's chief engineer in 1952.

Sold for: 121000 USD
Go to restoration
See other models

You may also like these cars

to top