Bentley 3 1/2 DB Drophead Coupe Series B by Maberly

Car producer : 

Bentley

Model:

3 1/2 DB Drophead Coupe Series B by Maberly

Year:

1933-1936

Type:

Cabriolet



The Bentley 3½ Litre (later enlarged to 4¼ Litre) was presented to the public in September 1933, shortly after the death of Henry Royce, and was the first new Bentley model following Rolls-Royce's acquisition of the Bentley brand in 1931.

Bentley sold only the drivable bare rolling chassis with engine and gearbox, scuttle and radiator, ready for coachbuilders to construct on it a body to the buyer's requirements. Many distributors ordered their preferred bodies as showroom stock to enable them to stock finished cars ready for immediate sale.

Bentleys of this era are known as Derby Bentleys because they were built in the Rolls-Royce factory located in Derby, England. Those of Bentley's previous independent era are Cricklewood Bentleys.

Chassis series A to F were 3½ Litre cars; G to L (excluding I) were 4¼ Litres, and the M series was the 4¼ Litre Overdrive chassis. Each series consisted of 100 chassis numbers, either odd or even. The numbers 13 and 113 in each series were not used, to avoid upsetting superstitious customers.

Based on an experimental Rolls-Royce project "Peregrine" which was to have had a supercharged 2¾ L engine, the 3½ Litre was finally fitted with a less adventurous engine developed from Rolls' straight-6 fitted to the Rolls-Royce 20/25. The Bentley variant featured a higher compression ratio, sportier camshaft profile and two SU carburettors on a crossflow cylinder head. Actual power output was roughly 110 bhp (82 kW) at 4500 rpm, allowing the car to reach 90 mph (145 km/h). The engine displaced 3.7 L (3669 cc/223 in³) with a 3¼ in (82.5 mm) bore and 4½ in (114.3 mm) stroke.

A 4-speed manual transmission with synchromesh on 3rd and 4th, 4-wheel leaf spring suspension, and 4-wheel servo-assisted mechanical brakes were all common with other Rolls-Royce models. The chassis was manufactured from nickel steel, and featured a "double-dropped" layout to gain vertical space for the axles and thus keep the profiles of the cars low. The strong chassis needed no diagonal cross-bracing, and was very light in comparison to the chassis built by its contemporary competitors, weighing in at 2,510 pounds (1,140 kg) in driveable form ready for delivery to the customer's chosen coachbuilder.

1177 3½ Litre cars were built, with about 529 of them being bodied by Park Ward, with the remainder "dressed" by other coachbuilders like Barker, Freestone & Webb, Gurney Nutting, Hooper, Mann Egerton, Mulliner (both Arthur and H J), Rippon, Thrupp & Maberly, James Young, Vanden Plas and Windovers in England; Figoni et Falaschi, Kellner, Saoutchik and Vanvooren in Paris; and smaller concerns elsewhere in UK and Europe.

Some of the most widely admired designs on the Derby Bentley chassis were the work of J Gurney Nutting, a company associated with quality marques - Bentley in particular - from its earliest days and a supreme practitioner of the coachbuilding craft in the late 1930s. Founded in Croydon, Surrey in 1919, Gurney Nutting had bodied its first Bentley before moving to London's fashionable Chelsea district in 1924, and within a few years was established as the Cricklewood firm's foremost supplier of bodies after Vanden Plas.

Gurney Nutting's work had a sporting flavour from the outset and succeeded in attracting the attention of society's upper echelons; the Prince of Wales and Duke of York were clients, and the firm gained its Royal Warrant in the early 1930s. Daimler and Rolls-Royce had been added to the Gurney Nutting portfolio in the mid-1920s, and the fruitful association with the latter continued into the succeeding decade.

9 chassis were delivered to Windovers, an age-old British coachbuilder that was founded in 1796. This company was the originator and patentee of many horse-drawn vehicle designs, and it continued until 1956 by building coachwork exclusively on Rolls-Royce and Bentley chassis, many for Indian maharajahs.

Sold for: 168000 USD
Go to restoration
See other models

You may also like these cars

to top