Ferrari 512 BBi Berlinetta Boxer by Scaglietti RH
|
Automobilhersteller : |
Ferrari |
|---|---|
|
Modell: |
512 BBi Berlinetta Boxer by Scaglietti RH |
|
Jahr: |
1981-1984 |
|
Art: |
Coupe |
A Ferrari Berlinetta Boxer is one of a series of cars produced by Ferrari in Italy between 1973 and 1984. They used a mid-mounted flat-12 engine, replacing the FR layout Daytona, and were succeeded in the Ferrari stable by the Testarossa. It was designed by Leonardo Fioravanti.
Having reasserted itself at the top of the supercar hierarchy with the first ‘Boxer’ – the 365 GTB/4 BB – Ferrari went one better with its successor, the 512 BB. For the new Boxer, Ferrari abandoned its long-standing practice of denoting a model by the capacity of an individual cylinder and adopted the Dino-type nomenclature where ‘512’ indicates 5 litres/12 cylinders. The increase in engine size from the original Boxer’s 4.4 litres was made not so much with increased power in mind but to enable the 512 BB to meet increasingly stringent emissions targets without loss of performance. Displacement was increased by enlarging both bore and stroke, while in addition the compression ratio was raised and dry-sump lubrication adopted. The result of all these changes was a useful increase in torque which, coupled with revised gear ratios, made the 512 more tractable.
Changes to Pininfarina’s inspired coachwork were, not surprisingly, few: an air-dam spoiler beneath the nose, brake-cooling NACA ducts ahead of the rear wheel arches, four rear lights instead of six and revised air intake boxes, while slightly fatter rear tyres meant that the width of the 512’s rear grew by just over 25mm. The running gear likewise came in for only minor revision, gaining stiffer springs/anti-roll bars and altered damping rates, while the already excellent all-round ventilated disc brakes remained unchanged. Inside, the 512 remained virtually the same as before but for the welcome adoption of multi-way adjustable seats in place of the fixed originals.
Production of the BB was a major step for Enzo Ferrari. He felt that a mid-engined road car would be too difficult for his buyers to handle, and it took many years for his engineers to convince him to adopt the layout. This attitude began to change as the marque lost its racing dominance in the late 1950s to mid-engined competitors. The mid-engined 4-, 6-, and 8-cylinder Dino racing cars were the result, and Ferrari later allowed for the production Dino road cars to use the layout as well. The company also moved its V12 engines to the rear with its P and LM racing cars, but the Daytona was launched with its engine in front. It was not until 1970 that a mid-engined 12-cylinder road car would appear.
In 1981 the model was updated with Bosch fuel injection, becoming the 512 BBi. Once again, maximum power remained unchanged but there was more available at lower revs and torque increased still further. Possessing an engine directly related to Ferrari’s contemporary Formula 1 unit, as well as being both lighter and faster than the legendary Daytona, the 512 BBi was one of the most capable and exciting supercars of its era and is still capable of providing all the thrills that an enthusiastic owner-driver could wish for.
No BB was ever originally sold in North America, as Enzo did not believe it to be worth the cost of complying with the extra environmental and safety regulations. However, third parties made conversions, and quite a few of them are now in the United States.
